Thermal insulating wall panels with visible fixings

IsoPer N thermal insulating wall panels with visible fixings can be mounted both horizontally and vertically and they represent a practical and economical solution for all those who are looking for reliable and resistant panels with visible fixings. 

Uses:

The thermal insulating wall panels with visible fixings offered by TeraSteel can be used for exterior closings for a wide range of works such as: 

- Industrial halls;
- Shopping centres;
- Storages;
- Site organizations (prefabricated modules);
- Cold rooms in the food industry;
- Socio-cultural buildings (schools, cafeterias, sports halls, etc.);
- Interior partitions for any type of construction.

IsoPer N thermal insulating wall panels with visible fixings are available in the following sizes:

  •  Length: 2000-13500 mm;
    • Admitted deviations:
      • For lengths smaller than: 3 m: ± 5 mm;
      • For lengths higher than 3 m: ± 10 mm.
    • Width: 1000 mm;
      • Admitted deviations ± 2 mm.

Thicknesses available:.

IsoPer N thermal insulating wall panels with visible fixings are available in the following thicknesses:

  • 30 mm,
  • 40 mm,
  • 50 mm,
  • 60 mm,
  • 80 mm,
  • 100 mm,
  • 120 mm.

Main features of the IsoPer N panels:

  • Reduced weight, between 9-14 kg/square meter;
  • Reduced heat transfer coefficient compared to other building materials;
  • Are impermeable to air and humidity due to the high percent of closed cells in polyurethane foam.

Accessories

The products are delivered together will all the accessories necessary for mounting:

  • Metal accessories (platework elements) – are delivered in the same colours as the panels.
  • Fixing elements.

Packaging

The thermal insulating wall panels with hidden fixings packed by size and colour, directly on the production line and are protected with expandable foil in PE, to avoid any damage of the pre-painted sides. The number of panels in each package depends on their length and thickness.

Admissible loading:

U* – heat transfer coefficient.

U1 – heat transfer coefficient considering the panel profile geometry and the thermal influence of the fixing joint.
U2 – heat transfer coefficient considering the panel profile geometry *Calculated acc. EN 14509:2013, method (A.10).

The standard length of the panel is between 2 and 13.5 m. The panels up to maximum 15 or shorter than 2 m can be done only after prior discussions with the technical department.

Dimensional tolerances according to EN 14509 – 2013:

 

LENGTH <= 3000 mm

± 5 mm

LENGTH > 3000 mm

± 10 mm

Deviation from perpendicularity

6 mm

USABLE WIDTH

± 2 mm

THICKNESS (D) <= 100 MM

± 2 mm

THICKNESS (D) > 100 MM

± 2 %